Self-adhesive transfer film three features:
1. shadowing privacy
Self-adhesive transfer film is a directly attached to the glass, played the role of intelligent dimming film can be achieved between the direct and scattered light varied by a voltage regulator that fit the self-adhesive transfer film glass exhibits penetrating or mist, applied on glass shower room and office partitions can show its unique effect.
2. energy saving
Self-adhesive transfer film pasted on architectural glass, insulation good effect, reduce the indoor sunlight can reduce air conditioning energy consumption.
Data show that: building energy consumption accounts for more than 25% of total energy consumption, while the doors and windows of energy consumption has accounted for about 50% of building energy consumption by the glass conduction loss has accounted for 70%. To turn down the air conditioning in the room temperature, decreasing by 1 ℃, we need to increase the power consumption by 6%. Therefore, when the outdoor temperature is too high, the use of "self-adhesive transfer film" adjustment in the atomization state can be sure the room is relatively cool.
3. Projection Screen
Self-adhesive transfer film during the day can be used as electronic curtains and wall insulation used in the evening it will be the best big advertising wall, this unique feature will undoubtedly be warmly welcomed by customers. As a large projection advertising wall projection comparable LCD TV. Use the projector, combined with infrared touch frame, but also the construction of large-size touch screen.
Technical Parameters:
1. Self-adhesive transfer film is milky white in the power off, when power was colorless and transparent.
2. Self-adhesive transfer film of transmittance:
> 73% (on -On) <8% (off -Off)
3. Self-adhesive transfer film conversion speed
OFF (when impervious) → ON (transparent) approximately 0.02 seconds
ON (transparent) → OFF (when impervious) for about 0.1 seconds
4. Monolithic maximum size:: 1500mm * 3000mm, (the current size is 1000mm * 3000mm)
5. Ambient temperature:
Storage temperature: -20 ° C to 80 ° C
Operating temperature: -10 ° C to 70 ° C
6. The driving voltage: 70V (AC 50 / 60HZ)
7. The continued opening time: 50,000 hours
8. The maximum viewing angle:> 120 °
9. Power: 7-10W / m² (ON)
Application:
1. Office of the multi-use
As a glass partition conference room, you can see outside things transparent, it can be used as a projection screen and whiteboard opaque.
2. The use of energy-saving building glass curtain wall
Through a combination of self-adhesive transfer film and insulation film, the use of temperature control layer transparent and mist, when the outdoor temperature is too high, self-adhesive transfer film presents mist, reduce indoor light energy, so that building more meet environmental and energy requirements.
3. The housing of interior design
Glass curtain, sun room, living room, bathroom and other places compartments can be used to highlight the master extraordinary taste. Usually glass was atomized state, so privacy is well protected; the use of transparent glass effect, allowing the owner to enjoy sun bathing.
The merchandise display and commercials
Glass display window allows goods are not to be seen, it can also be used to advertise opaque projector; transparent display of goods, and the two states can be instantly switched.
5. Special Occasion use
Bathroom and toilet cubicles glass Uses: glass transparent when not in use, when you use as long as the key in the door that is presented mist.
Car insulation uses: can use self-adhesive transfer film conversion transparent and opaque, effectively blocking the sun.
Hospital secret space purposes: hospital nursery rooms, intensive care units and other exploration window, replace curtains reduce dust mites and noise.
Clean room use: clean room use self-adhesive transfer film can transform transparent and opaque, reducing wear clean clothes out of the clean room of inconvenience.
